top of page
EXPERIENCE ENERGY INDEPENDENCE
Black Hills Solar is a Premier Certified Installer for Tesla Energy. Tesla's integrated solar and battery Powerwall system stores excess solar power from the daytime for use at night. Powerwall provides a seamless switch to backup power during a grid outage, reduces demand from the grid, and helps to offset higher energy costs at peak times.
Tesla Powerwall
Tesla Powerwall has configuration options to support a wide range of installation requirements.
Powerwall 3 with Backup Switch
A single Powerwall 3 has an integrated solar inverter and 11.5 kW of power output, capable of supporting large air conditioners or well pumps. Most homes require only one Powerwall.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Backup Switch
The Backup Switch enables easy whole-home backup by integrating directly with the utility meter, reducing installation costs.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Powerwall with Backup Gateway and Solar Inverter
Tesla Powerwall and Solar are adaptable to a wide range of installation requirements.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
Powerwall 3 with Backup Switch
A single Powerwall 3 has an integrated solar inverter and 11.5 kW of power output, capable of supporting large air conditioners or well pumps. Most homes require only one Powerwall.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Backup Switch
The Backup Switch enables easy whole-home backup by integrating directly with the utility meter, reducing installation costs.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Powerwall with Backup Gateway and Solar Inverter
Tesla Powerwall and Solar are adaptable to a wide range of installation requirements.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
Powerwall 3 with Backup Switch
A single Powerwall 3 has an integrated solar inverter and 11.5 kW of power output, capable of supporting large air conditioners or well pumps. Most homes require only one Powerwall.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Backup Switch
The Backup Switch enables easy whole-home backup by integrating directly with the utility meter, reducing installation costs.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Powerwall with Backup Gateway and Solar Inverter
Tesla Powerwall and Solar are adaptable to a wide range of installation requirements.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
Powerwall 3 with Backup Switch
A single Powerwall 3 has an integrated solar inverter and 11.5 kW of power output, capable of supporting large air conditioners or well pumps. Most homes require only one Powerwall.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Backup Switch
The Backup Switch enables easy whole-home backup by integrating directly with the utility meter, reducing installation costs.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Powerwall with Backup Gateway and Solar Inverter
Tesla Powerwall and Solar are adaptable to a wide range of installation requirements.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
Powerwall 3 with Backup Switch
A single Powerwall 3 has an integrated solar inverter and 11.5 kW of power output, capable of supporting large air conditioners or well pumps. Most homes require only one Powerwall.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Backup Switch
The Backup Switch enables easy whole-home backup by integrating directly with the utility meter, reducing installation costs.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Powerwall with Backup Gateway and Solar Inverter
Tesla Powerwall and Solar are adaptable to a wide range of installation requirements.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
Powerwall 3 with Backup Switch
A single Powerwall 3 has an integrated solar inverter and 11.5 kW of power output, capable of supporting large air conditioners or well pumps. Most homes require only one Powerwall.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Backup Switch
The Backup Switch enables easy whole-home backup by integrating directly with the utility meter, reducing installation costs.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Powerwall with Backup Gateway and Solar Inverter
Tesla Powerwall and Solar are adaptable to a wide range of installation requirements.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
Powerwall 3 with Backup Switch
A single Powerwall 3 has an integrated solar inverter and 11.5 kW of power output, capable of supporting large air conditioners or well pumps. Most homes require only one Powerwall.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Backup Switch
The Backup Switch enables easy whole-home backup by integrating directly with the utility meter, reducing installation costs.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Powerwall with Backup Gateway and Solar Inverter
Tesla Powerwall and Solar are adaptable to a wide range of installation requirements.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
Powerwall 3 with Backup Switch
A single Powerwall 3 has an integrated solar inverter and 11.5 kW of power output, capable of supporting large air conditioners or well pumps. Most homes require only one Powerwall.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Backup Switch
The Backup Switch enables easy whole-home backup by integrating directly with the utility meter, reducing installation costs.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Powerwall with Backup Gateway and Solar Inverter
Tesla Powerwall and Solar are adaptable to a wide range of installation requirements.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
Powerwall 3 with Backup Switch
A single Powerwall 3 has an integrated solar inverter and 11.5 kW of power output, capable of supporting large air conditioners or well pumps. Most homes require only one Powerwall.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Backup Switch
The Backup Switch enables easy whole-home backup by integrating directly with the utility meter, reducing installation costs.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Powerwall with Backup Gateway and Solar Inverter
Tesla Powerwall and Solar are adaptable to a wide range of installation requirements.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
Powerwall 3 with Backup Switch
A single Powerwall 3 has an integrated solar inverter and 11.5 kW of power output, capable of supporting large air conditioners or well pumps. Most homes require only one Powerwall.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Expansion options allow each Powerwall system to further increase its energy storage and/or power capacity.
Powerwall 3 may be used with the Backup Switch or the Backup Gateway depending on the installation requirements.
Backup Switch
The Backup Switch enables easy whole-home backup by integrating directly with the utility meter, reducing installation costs.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Backup Switch is suitable for 200A services when the utility meter installed directly on the building.
Powerwall with Backup Gateway and Solar Inverter
Tesla Powerwall and Solar are adaptable to a wide range of installation requirements.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
The Tesla Backup Switch is used when the utility meter is located away from the home (such as on a utility pole or pedestal), or if a partial backup configuration is required.
The Tesla Solar Inverter is a standalone inverter that may be used when solar panels are installed without a battery, or when solar is installed separately from the Powerwall such as on a detached garage.
Click Get Started to learn more and get a quote.
bottom of page